2. Universidad Cardenal Herrera-CEU

The present paper aims at analyzing the topological content of the complex trajectories that weeder-autonomous robots follow in operation. We will prove that the topological descriptors of these trajectories are affected by the robot environment as well as by the robot state, with respect to maintenance operations. Most of existing methodologies enabling efficient diagnosis are based on the data analysis, and in particular on some statistical quantities derived from the data. The present work explores the use of an original approach that instead of analyzing quantities derived from the data, analyzes the “shape” of the data, that is, the time series topology based on the homology persistence. We will prove that this procedure is able to extract valuable patterns able to discriminate the trajectories that the robot follows depending on the particular patch in which it operates, as well as to differentiate the robot behavior before and after undergoing a maintenance operation. Even if it is a preliminary work, and it does not pretend to compare its performances with respect to other existing technologies, this work opens new perspectives in considering quite natural and simple descriptors based on the intrinsic information that data contains, with the aim of performing efficient diagnosis and prognosis.

On 9 March 2020, the World Health Organization (WHO) Global Influenza Programme (GIP) asked participant sites on the Global Influenza Hospital Surveillance Network (GIHSN) to contribute to data collection concerning severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). We re-analysed 5833 viral RNA archived samples collected prospectively from hospital admissions for influenza-like illness (ILI) in the Valencia Region of Spain by the Valencia Hospital Surveillance Network for the Study of Influenza and Other Respiratory Viruses (VAHNSI) network (four hospitals, catchment area population 1 118 732) during the pre-pandemic 2018/2019 (n = 4010) and pandemic 2019/2020 (n = 1823) influenza seasons for the presence of SARS-CoV-2. We did not find evidence for community-acquired SARS-CoV-2 infection in hospital admissions for ILI in our region before early March 2020.

Modal analysis is widely used for addressing NVH—Noise, Vibration, and Hardness—in automotive engineering. The so-called principal modes constitute an orthogonal basis, obtained from the eigenvectors related to the dynamical problem. When this basis is used for expressing the displacement field of a dynamical problem, the model equations become uncoupled. Moreover, a reduced basis can be defined according to the eigenvalues magnitude, leading to an uncoupled reduced model, especially appealing when solving large dynamical systems. However, engineering looks for optimal designs and therefore it focuses on parametric designs needing the efficient solution of parametric dynamical models. Solving parametrized eigenproblems remains a tricky issue, and, therefore, nonintrusive approaches are privileged. In that framework, a reduced basis consisting of the most significant eigenmodes is retained for each choice of the model parameters under consideration. Then, one is tempted to create a parametric reduced basis, by simply expressing the reduced basis parametrically by using an appropriate regression technique. However, an issue remains that limits the direct application of the just referred approach, the one related to the basis ordering. In order to order the modes before interpolating them, different techniques were proposed in the past, being the Modal Assurance Criterion—MAC—one of the most widely used. In the present paper, we proposed an alternative technique that, instead of operating at the eigenmodes level, classify the modes with respect to the deformed structure shapes that the eigenmodes induce, by invoking the so-called Topological Data Analysis—TDA—that ensures the invariance properties that topology ensure.

It is almost 20 years since the largest observational, multicentre study evaluating the risks of mortality associatedwith general anaesthesia in horses. We proposed an internet-basedmethod to collect data (cleaned and analysed with R) in a multicentre, cohort, observational, analytical, longitudinal and prospective study to evaluate peri-operative equine mortality. The objective was to report the usefulness of the method, illustrated with the preliminary data, including outcomes for horses seven days after undergoing general anaesthesia and certain procedures using standing sedation. Within six months, data from 6701 procedures under general anaesthesia and 1955 standing sedations from 69 centres were collected. The results showed (i) the utility of the method; also, that (ii) the overall mortality rate for general anaesthesia within the seven-day outcome period was 1.0%. In horses undergoing procedures other than exploratory laparotomy for colic (“noncolics”), the rate was lower, 0.6%, and in “colics” it was higher, at 3.4%. For standing sedations, the overall mortality rate was 0.2%. Finally, (iii) we present some descriptive data that demonstrate new developments since the previous CEPEF2. In conclusion, horses clearly still die unexpectedly when undergoing procedures under general anaesthesia or standing sedation. Our method is suitable for case collection for future studies.

We are interested in evaluating the state of drivers to determine whether they are attentive to the road or not by using motion sensor data collected from car driving experiments. That is, our goal is to design a predictive model that can estimate the state of drivers given the data collected from motion sensors. For that purpose, we leverage recent developments in topological data analysis (TDA) to analyze and transform the data coming from sensor time series and build a machine learning model based on the topological features extracted with the TDA. We provide some experiments showing that our model proves to be accurate in the identification of the state of the user, predicting whether they are relaxed or tense.