Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10637/14322

In situ calibration algorithm to optimize energy consumption in an automotive stamping factory process


Vista previa

Ver/Abrir:
 Situ_Peinado_ICINCO_2022.pdf
4,72 MB
Adobe PDF
Título : In situ calibration algorithm to optimize energy consumption in an automotive stamping factory process
Autor : Peinado Asensi, Iván
Montés Sánchez, Nicolás
García Magraner, Eduardo Andrés
Materias: Optimización matemática.Mathematical optimization.Industria del automóvil - Producción.Automóviles - Fabricación - Teledetección.Automóviles - Producción.Automobiles - Production.Automobiles industry and trade - Energy consumption.Industria del automóvil - Automatización.Automobile industry and trade - Automation.Automobiles - Manufacturing - Remote sensing.Industria del automóvil - Consumo de energía.Desarrollo sostenible.Sustainable developmentAutomobile industry and trade - Production.
Editorial : Science and Technology Publications
Citación : Peinado Asensi, I., Montés, N. & García, E. (2022). In situ calibration algorithm to optimize energy consumption in an automotive stamping factory process. In Proceedings of the 19th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2022) (pp. 169-176). Setúbal (Portugal): Science and Technology Publications. DOI: https://doi.org/10.5220/0011272600003271
Resumen : The world’s large factories in all sectors consume a great deal of resources, either raw materials or energy, to develop their products. Saving resources can have a positive impact on the sustainable development of the planet. Automotive manufacturers are a clear example of how to save by investing resources in improving technologies and optimizing processes. This article focuses on one of the most common processes in the automotive sector: the stamping process. For the optimization of this process, previous simulations are usually carried out in order to define the optimal parameters and which should only be applied for a correct operation. The real circumstances of the plant show there is a large discrepancy between the parameters obtained by simulation and the real process because of the difference in material properties, lubrication, press operation, etc. The solution is that the operators must adjust the parameters a posteriori and the only criterion to follow is obtaining the right quality of the part. In many cases, the parameters are well above the ideal. This article presents some algorithms used in order to perform an in situ calibration of the stamping presses to find the press parameters that, guaranteeing the quality of the part, allow to adjust the energy consumption to the minimum. At the end of this article the experimental results from this in-situ calibration process and the energy savings are shown.
Descripción : Este artículo se encuentra disponible en la página web de la revista en la siguiente URL: https://www.scitepress.org/PublicationsDetail.aspx?ID=n0D4ioSIYik%3d&t=1
Esta comunicación pertenece a la 19th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2022) - Lisbon, Portugal, 14-16 July 2022.
URI : http://hdl.handle.net/10637/14322
Derechos: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
ISBN : 9789897585852
ISSN : 2184-2809.
Fecha de publicación : 24-jun-2022
Centro : Universidad Cardenal Herrera-CEU
Aparece en las colecciones: Dpto. Matemáticas, Física y Ciencias Tecnológicas





Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.